Wet Air Scrubber, Fume Scrubber & Dust Collectors
|
|
Our Devansco line of air cleaning equipment & systems are functional, economical, easy to maintain.
These units clean air from industrial processes.
Devansco provides the products and services needed to bring any factory up to industry air quality
standards. Begin with specialized engineering that advises and consults throughout the decision
making process and finish with a total Devansco air cleaning solution.
|
 |
FIVE STAGE CLEANING PROCESS
1st Stage |
Fine micron particles as small as ¼ micron are captured in the high volume of low-pressure water that is
injected into the incoming air stream. |
2nd Stage |
The particulate laden water is accelerated through an adjustable venturi. This action ensures that the particles
stay trapped within the water stream. |
3rd Stage |
The air stream sends the high velocity particulates crashing into a large tank of water. The water tank allows
for the air to bubble out, while the particulates are submerged and trapped. |
4th Stage |
As the air stream flows up through the moisture eliminator plates, finer particulate that may still be in the
exhaust stream clings to the condensation
on the plates. The clean air is then blown back into the work area, or into the exhaust ductwork. |
5th Stage |
In the water tank, the particulate settles to the bottom where a conveyor scrapes the particulate into an area
that dries the sludge, leaving clean water behind. The dried sludge is then deposited into a container
located outside the unit, ready for recycling or disposal.
|
|
IDEAL APPLICATIONS
- Metal Machining, Grinding, Buff & Polish
- Shot Blasting & Shot Peening
- Die Casting, Foundry & Automotive
- Cast Iron Machining
- Foundry Shakeout
|
 |
FEATURES
- Superior cleaning of fine micron particles as small as ¼” micron.
- Models range from 500 cfm to 60,000 cfm with static pressures of up to 24”.
- Compact and integrated design that uses minimal floor space.
- Water is re-circulated, resulting in minimal water loss (evaporation).
- Collected particulate can be recycled and reused.
- Low noise levels.
- A Stainless steel construction can be requested for corrosive applications.
- We can also custom fit units into your space requirements.
- Transparent panels to allow for quick access and observation of the cleaning process.
- Standard components that are easily accessible and competitively priced.
|
